| MINERAL TURPENTINE LAWS (BPCL) | |
| Colour (Say bolt) Min) | 20 |
| Density at 15 oC gm/ml (Typical) | 0.795 |
| Flash Point (Abel) oC Min | 35 |
| Distillation Range
a) IBP oC Min |
145
205 |
| Aromatic Content % V Max | 40 |
| Copper Stripe corrosion for 3 hrs. at 50 oC | Not worse than No. 1 |
| Residue on evaporation m/g 100 ml. max | 5 |
| Mineral Turpentine Oil Grade 1 | |||
| Industrial Solvent | |||
| Parameters | Units | Method | Typical Specification |
| Appearance | – | Visual | B & C |
| Aromatic Content | Vol % | Astm D -1319 | 12%-14% |
| Total Acid No | Mg Koh/G | Astm D -974 | Natural |
| Copper Corrosion | – | Astm D-130 | 1A |
| Specific Gravity at 15*C | KG/L | Astm D -1298 | 0.77-0.7877 |
| Color | Saybolt | Astm D -156 | 26 |
| Initial Boiling Point | *C | Astm D -86 | 130-145 |
| Final Boiling Point | *C | Astm D -86 | 217 |
| Flash Point | *c | Astm D -93 | 42 |
| Sulphur Content | Ppm | Vop Method | 30 |
| Mineral Turpentine Oil Grade 2 | |||
| Industrial Solvent-Cut 2 | |||
| Parameters | Units | Method | Typical Specification |
| Appearance | – | Visual | B & C |
| Aromatic Content | Vol % | Astm D -1319 | MAX 15 % |
| Total Acid No | Mg Koh/G | Astm D -974 | Natural |
| Copper Corrosion | – | Astm D-130 | 1A |
| Specific Gravity @ 15*C | KG/L | Astm D -1298 | 0.775-0.790 |
| Color | Saybolt | Astm D -156 | >25 |
| Initial Boiling Point | *C | Astm D -86 | 150 |
| Final Boiling Point | *C | Astm D -86 | 240 |
| ANILINE POINT | *C | 62 | |